General Purpose Forceps and Tweezers
Available in a variety of sizes, styles, and configurations to support specific handling requirements, including pointed, blunt, rounded, curved, angled, or flat tips; plain or serrated gripping surfaces; scissor-style handles; self-closing designs; alignment guide pins; and protective foam, silicone, or PTFE-coated surfaces to enhance grip and minimize contamination or damage to sensitive components and materials.
Typical applications include manipulation of microscope coverslips, filter papers and discs, electronic components, precision mechanical parts, and other small or fragile items in controlled, industrial, research, and manufacturing environments. Excludes surgical, dissection, and other medical forceps intended for clinical procedures.
Roboz Surgical Hartman Mosquito Forceps; Curved; 4" Length, 0.8 mm Tip Diameter
Hartman Mosquito Forceps; Curved; 4 in. Length, 0.8mm tip diameter, 1.9mm jaw width @ 5mm from the tip. The curved version of our shortest hemostats is 4 in. long. The tip diameter is 0.8mm, the jaw width is 1.9mm measured at 5mm in from the tip.
Electron Microscopy Sciences Rubis Standard SA Steel Tweezers Style 3M, 70 mm OAL
With more than fifty years of experience, RUBIS tweezers represents authentic Swiss quality. The material used in these tweezers is SA steel, which is acid-proof, stainless steel, 100% antimagnetic and it is resistant to HF and nitric acid. Pointed, thin and fine mini-tweezers.
OAL: 70 mm
Electron Microscopy Sciences Rubis Standard SA Steel Tweezers Style OC9, 90 mm OAL
With more than fifty years of experience, RUBIS tweezers represents authentic Swiss quality. The material used in these tweezers is SA steel, which is acid-proof, stainless steel, 100% antimagnetic and it is resistant to HF and nitric acid. Flat fine points.
OAL: 90 mm
Electron Microscopy Sciences EMS Ceramic Tweezers Style 8507, Curved Tips, 125 mm
Zirconia Toughened Alumina (ZTA) is a advanced ceramic compound that has a superior combination of high strength (from zirconia) and extreme hardness (from alumina). The density is relatively low and there is no open porosity. It is characterized by a very hard surface with good abrasion and wear resistance and good flexural strength and fracture toughness.
Stable at high temperatures, corrosion resistance, nearly chemically inert, and electrically insulating, ZTA is ideal for soldering processes and handling of components during thermal and chemical processes. These tweezers are used when very rigid tips are required and are suited for working with acids (except HF), for SDM, solders pot, and high temperature exposure. Clean room approved. Can be sterilized.
OAL: 125 mm
Tips: Curved, tips 1 mm wide, smooth
Electron Microscopy Sciences EMS Ceramic Tweezers Style 501, Medium Tips, 125 mm
Zirconia Toughened Alumina (ZTA) is a advanced ceramic compound that has a superior combination of high strength (from zirconia) and extreme hardness (from alumina). The density is relatively low and there is no open porosity. It is characterized by a very hard surface with good abrasion and wear resistance and good flexural strength and fracture toughness.
Stable at high temperatures, corrosion resistance, nearly chemically inert, and electrically insulating, ZTA is ideal for soldering processes and handling of components during thermal and chemical processes. These tweezers are used when very rigid tips are required and are suited for working with acids (except HF), for SDM, solders pot, and high temperature exposure. Clean room approved. Can be sterilized.
OAL: 125 mm
Tips: Straight, tips 1 mm wide, serrated
Electron Microscopy Sciences EMS Ceramic Tweezers Style 8501 Fgg, Fine Tips, 125 mm
Zirconia Toughened Alumina (ZTA) is a advanced ceramic compound that has a superior combination of high strength (from zirconia) and extreme hardness (from alumina). The density is relatively low and there is no open porosity. It is characterized by a very hard surface with good abrasion and wear resistance and good flexural strength and fracture toughness.
Stable at high temperatures, corrosion resistance, nearly chemically inert, and electrically insulating, ZTA is ideal for soldering processes and handling of components during thermal and chemical processes. These tweezers are used when very rigid tips are required and are suited for working with acids (except HF), for SDM, solders pot, and high temperature exposure. Clean room approved. Can be sterilized.
OAL: 125 mm
Tips: Straight, tips 0.3 mm wide, smooth, very fine
Electron Microscopy Sciences Rubis Non-slip Grip Tweezers Style 1, 120 mm OAL
This special soft coating provides a non-slip grip and improves the handling of the tweezer. The soft-coating prevents hand fatigue, and protects the hand from heat and cold. Made from the finest stainless steel grade
OAL: 120 mm
Electron Microscopy Sciences EMS Super Thin and Long Tweezers Style 64A, 140 mm OAL
These long and slender tweezers work well in multiple precision applications and are especially well suited for working near heat sources. They are made from SA low carbon austenitic steel that is non magnetic and anti acid and is ideal for use where corrosion resistance and toughness are primary requirements. Sharp, curve tips.
OAL: 140 mm
Electron Microscopy Sciences EMS Wafer Tweezers Style 48WF
These tweezers are especially designed for the handling of delicate and fragile silicon wafers, scintillation discs, glass slides, coverslips etc. Made from antimagnetic/anti acid steel with a very smooth surface and a non-glare finish.
Tip Width: 28.0 mm
Depth: 9.0 mm
Tip Lip: E:2.5 mm
Offset: 4.0 mm
Electron Microscopy Sciences Rubis Wafer Tweezers Style 43LB-4 Peek, 138 mm
For wafers handling. Made of PEEK an ESD safe soft, conductive fiber, with heat resistance up to 250°C. Clean-room compatible.
OAL: 138 mm
Width: 13 mm
Electron Microscopy Sciences EMS Flat-Tip Tweezers Style 574A, 145 mm OAL
Flat-Tip Tweezers are made from SA low carbon austenitic steel that is non magnetic and anti acid which is ideal for use where corrosion resistance and toughness are primary requirements. The tweezers have serrated grips. Flat and tips bent upward. Tip width: 6mm.
OAL: 145 mm
Electron Microscopy Sciences Rubis Wafer Tweezers Style 42LB-6, 130 mm
Made from SA steel with serrated handles. These tweezers are specially designed to handle different fragile and delicate materials of gallium or silicon wafers. They have a smooth polished non-glare surface with a satin finish. The tweezers have stopping pins turned up on lateral edges and graduated lower paddles prevent the wafer from slipping. Step up lower paddle.
OAL: 130 mm
Width: 19.5 mm
Tips: 6 teeth
Electron Microscopy Sciences EMS Flat-Tip Tweezers Style 35A, 120 mm OAL
Flat-Tip Tweezers are made from SA low carbon austenitic steel that is non magnetic and anti acid which is ideal for use where corrosion resistance and toughness are primary requirements. The tweezers have serrated grips. Smooth and short wide tips. Tip 6.7mm wide.
OAL: 120 mm
Electron Microscopy Sciences EMS Flat-Tip Tweezers Style 33A, 115 mm OAL
Flat-Tip Tweezers are made from SA low carbon austenitic steel that is non magnetic and anti acid which is ideal for use where corrosion resistance and toughness are primary requirements. The tweezers have serrated grips. Flat, round tips.. Tip 6.6mm wide.
OAL: 115 mm